Image for Illustration purposes only. Actual product may vary
JET 321379 BDB-929 Belt Drive Bench Lathe 3/4HP 115V Single Phase
MODEL 321379
Contact supplier for technical support on: 8002746846
$3,799.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: Yes
Number of Longitudinal and Cross Feed Rates
60
Range of Longitudinal Feeds (IPR)
0.0006-0.0368
Swing Over Cross Slide (In.)
5
Weight (Lbs.)
287
Motor (HP)
3/4 HP, 115V, 1PH
Range of Inch Threads (TPI)
8 - 56
Number of Inch Threads
27
Number of Metric Threads
12
Swing Over Bed (In.)
8-3/4
Taper in Tailstock Spindle
MT-2
Number of Spindle Speeds
6
Spindle Taper with Sleeve
MT-3
Compound Slide Travel (In.)
1-7/8
Spindle Bore (In.)
3/4
Range of Spindle Speeds (RPM)
130-2000
Tailstock Spindle Travel (In.)
1-9/16
Steady Rest Capacity (In.)
1-3/4
Spindle Mount
1-1/2 x 8TPI
Range of Metric Threads
0.5 - 3.5
Width of Bed (In.)
4-1/2
Carriage Travel (In.)
26.5
Overall Dimensions (L x W x H) (In.)
51x22x20
Max Tool Size (In.)
1/2
The BDB-929 benchtop lathe is the essential step to improving your shop's capabilities. Engineered with precision induction hardened ground bed ways and precision tapered roller bearings the BDB-929 delivers the smooth operation and rigidity needed to craft professional pieces.
JET Turning Lathe, 8-3/4 in Swing Over Bed, 4-1/4 in Swing Over Cross Slide, 27-1/2 in Distance Between Centers, 4-1/2 in Bed Width, #3 Morse Taper Tailstock Taper, 3/4 in Spindle, 130 to 2000 rpm Spindle Speed, 6 Spindle Speed, 4-1/4 in Cross Travel, 1-9/16 in Tailstock Spindle Travel, 26-1/2 in Carriage Travel, 1-7/8 in Compound Travel, 0.0006 to 0.0368 in Maximum Longitudinal Feed Rate per Revolution, 3/4 hp, 115 VAC, 51 in L x 22 in W x 20 in H
Dimensions
- Length: 55 in
- Height: 30 in
- Width: 20 in
- Length: 34508.2 cu-in
Features
- Induction hardened and ground bed way
- Spindle supported by precision tapered roller bearings
- Safety on/off switch
- Emergency stop within easy reach of the operator
- Chuck guard
- Quick change gearbox provides wide range of inch and metric threads
- Power longitudinal feed allows threading and reverse threading
- Quick locking tailstock
- Standard 1-1/2 in x 8 TPI spindle mount allows for many aftermarket accessories
- Reversing switch for added versatility
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read moreWhen you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
